Gen4

Products: 1–7 of 7
Show:20
Sort by:Recommended

  • 13621 - Ski-Doo Gen4, Low (14"), Tinted

    Ski-Doo Gen4 Low (14"), Tinted

    Designed and engineered to give performance above the OEM shield while still allowing to run handguards. This shield is not a "pull-off" like the stock shield. You remove your existing shield and base piece (pull it off) and bolt the Cobra shield to your dash using existing holes and the mounting bolts provided with the shield.

    Fits '18 All 850's; '19-'22 MXZ (except '19-'20 Sport 600); '19-'22 Renegade/Backcountry (except '19-'20 600 Ace & 600 Sport); '19-'22 Summit (except '19-'20 600 Sport); '19-'22 Grand Touring (except '19 600 Ace); '19-'22 Expedition (except '19 600 Ace); All 2023 Gen4 Chassis Snowmobiles.

    Note: Rider in photo is 5'9" and the sled has a 5" riser.

    Works with Handguards.

    Works with Ski Doo Glove Box Extension.

    Also works with Lynx Snowmobiles: All '22 and '23 Xterrain, Rave

    Note: Mounting Hardware Included

    0.0
    Add first review
    Not rated yet
    • $130.00
    Only 4 left in stock
    Sorry, we only have 4 of that item available

  • 13630 - Ski-Doo Gen4, Mid (20"), Clear w/black graphics

    Ski-Doo Gen4 Mid (20"), Clear w/ black graphics
    Designed and engineered to give performance above the OEM shield while still allowing to run handguards. This shield is not a "pull-off" like the stock shield. You remove your existing shield and base piece (pull it off) and bolt the Cobra shield to your dash using existing holes and the mounting bolts provided with the shield.

    Fits '18 All 850's; '19-'22 MXZ (except '19-'20 Sport 600); '19-'22 Renegade/Backcountry (except '19-'20 600 Ace & 600 Sport); '19-'22 Summit (except '19-'20 600 Sport); '19-'22 Grand Touring (except '19 600 Ace); '19-'22 Expedition (except '19 600 Ace); All 2023 Gen4 Chassis Snowmobiles.

    Note: Rider in photo is 5'9" and the sled has a 5" riser.

    Works with Handguards. 

    Works with Ski Doo Glove Box Extension.

    Note: Mounting Hardware Included

    0.0
    Add first review
    Not rated yet
    • $200.00
    Out of stock

  • 13640 - Ski-Doo Gen4, Tall (22"), Clear w/black graphics

    Ski-Doo Gen4 Tall (22"), Clear w/ black graphics

    Designed and engineered to give performance above the OEM shield while still allowing to run handguards. This shield is not a "pull-off" like the stock shield. You remove your existing shield and base piece (pull it off) and bolt the Cobra shield to your dash using existing holes and the mounting bolts provided with the shield.

    Fits '18 All 850's; '19-'22 MXZ (except '19-'20 Sport 600); '19-'22 Renegade/Backcountry (except '19-'20 600 Ace & 600 Sport); '19-'22 Summit (except '19-'20 600 Sport); '19-'22 Grand Touring (except '19 600 Ace); '19-'22 Expedition (except '19 600 Ace); All 2023 Gen4 Chassis Snowmobiles.

    Note: Rider in photo is 5'9" and the sled has a 5" riser.

    Works with Handguards.

    Works with Ski Doo Glove Box Extension. (see photo)

    Note: Mounting Hardware Included

    Click Here - Installation Instructions

    0.0
    Add first review
    Not rated yet
    • $220.00
    Out of stock

  • 14593 - Windshield Well Nut Mounting Kit

    PowerMadd Windshield Well Nut Mounting Kit

    Mounting kit contains Four rubber anchors(well nut), screws, base and caps to mount shield to dashboard.

    0.0
    Add first review
    Not rated yet
    • $10.00
    Only 1 left in stock
    Sorry, we only have 1 of that item available

  • 14592 - O-ring Snowmobile Windshield Retainer Kit

    This o-ring kits includes four o-rings necessary to mount certain windshields to the hood. These fasteners are placed around the windshield tabs to secure the shield to the hood.

    Fitment: Check your sled to verify which fasteners your windshield uses.

    - Kit includes 4 o-rings.

    0.0
    Add first review
    Not rated yet
    • $5.00
    Sorry, we only have 25 of that item available

Bestsellers