Matryx

Polaris Matryx, Low, (15") Tinted.

Designed and engineered to give performance above the OEM Windshield while still allowing the rider to use handguards. This Windshield is a "pull-off" style like the stock windshield. You will remove your existing windshield and lower windshield mounting brackets (pull it off) from the snowmobile. Remove the stock windshield from the windshield retainer bracket by removing the spider nuts. Then, secure the Cobra shield to the retainer bracket by installing the provided spider nuts. Finally, re-install the shield onto the snowmobile in the stock location. See instructions for details.

Note: Rider in photos is 5'9" and the sled has a 4" riser.

Works with Handguards.

Note: Push Nuts Included

REQUIRES OEM lower windshield mounting brackets. Polaris part number 5457530, 5457531, 5457532, 5457533 bracket. (2) 5433833 grommets.

Fits '20-'23 Matryx Chassis Snowmobiles.

Click Here - Installation Instructions

Polaris Matryx, Mid, (18") Clear w/black graphics.

Designed and engineered to give performance above the OEM Windshield while still allowing the rider to use handguards. This Windshield is a "pull-off" style like the stock windshield. You will remove your existing windshield and lower windshield mounting brackets (pull it off) from the snowmobile. Remove the stock windshield from the windshield retainer bracket by removing the spider nuts. Then, secure the Cobra shield to the retainer bracket by installing the provided spider nuts. Finally, re-install the shield onto the snowmobile in the stock location. See instructions for details.

Note: Rider in photos is 5'9" and the sled has a 4" riser.

Works with Handguards.

Note: Push Nuts Included

REQUIRES OEM lower windshield mounting brackets. Polaris part number 5457530, 5457531, 5457532, 5457533 bracket. (2) 5433833 grommets.

Fits '20-'23 Matryx Chassis Snowmobiles.

Click Here - Installation Instructions

PowerMadd Windshield Well Nut Mounting Kit

Mounting kit contains Four rubber anchors(well nut), screws, base and caps to mount shield to dashboard.

This o-ring kits includes four o-rings necessary to mount certain windshields to the hood. These fasteners are placed around the windshield tabs to secure the shield to the hood.

Fitment: Check your sled to verify which fasteners your windshield uses.

- Kit includes 4 o-rings.